6
A1-
Fig.
12
A1-
Fig.
13
A1-
Fig.
14
A1-
Close all opened windows of audio settings.
Make sure that the boxes of Recording, Line In and
Stereo Mix are checked at least.
Click OK
Then proceed as described in Fig.
Make sure that sliders
for Recording, Line In
and Stereo Mix are
located in upper position
and the allocated Select
boxes are checked.
Now the PT-8000A
signal should be seen on
IF-Monitor.
If not all controls are
shown which should be
verified, open the menu
Options and click
Properties.
The window
Properties
will be opened
(Fig.
14).
A1-
12.
A1-