48
13.2 DSP Noise Reduction NR
Fig. 64
13.3 Noise Blanker NB
Fig. 66
Pushing the NR button located in the
cluster DSP will active the Automatic
Noise Reduction (ANR or NR):
On the display the DSP NR is outlined as NR.
DSP NR-LED will be on.
NR is off after power on.
The RX-NB will be
activated by pushing
the control RX-NB
which is located as
depicted:
On the display it is outlined as NB.
Turning the RX-NB control will adjust the threshold of the noise blanker to the
specific situation. Noise is dramatically reduced hence improving the
readability of weak signals.
NB is off after power on.
Fig. 65
Fig. 67