Table of Contents
Advertisement
PT-8000A Appendix A2 v2.00.33
Fig.
12
A2-
No operation program
Fig.
13
A2-
Fig.
14
A2-
Terminate update program
Fig.
15
A2-
A2.8
Get PT-8000A ready to update
The Start button is now set to active (black font) and thus the update
program is ready for program transfer
( continue with chapter A2.8 Get PT-8000A ready to update).
If in the Open dialog box no program will be selected (by clicking Cancel), the
following message will be displayed:
In this case the Start button remains inactive (grey font).
Using the Exit button, the update program may be terminated at any
time.
Each PT-8000A CPU is upgraded separately. The file names give clues to the
CPU, as well as the version number:
CPU
MAIN CPU
RX CPU
ANT-Tuner CPU
Once the PC is ready for the update, now the PT-8000A needs to be set to the
update standby mode.
1. Pushing MENU button located in the cluster DISPLAY:
The MENU menu will be displayed (see Manual Page 53).
2. Pushing Soft softkey:
The SOFTWARE menu will be called up (Fig.
An overview of the currently loaded software versions will be
shown on display (Fig.
File Name
PT8_MAIN_0100.H86
PT8_RX_0121.H86
PT8_ANT-T_0110.H86
17).
A2-
5
A2-
Version
M 01.00
R 01.21
K 01.10
Tab.
1
A2-
16).
A2-
Advertisement
Table of Contents
