PT-8000A Appendix A1 v2.00.33
A1.6.5 Signal Level Adjustment
PC Adjustment
Fig.
9
A1-
Fig.
10
A1-
Fig.
11
A1-
Because of variation in audio settings of each single computer system (PC) it is
necessary to synchronize the signal level display of IF-Monitor software and
PT-8000A.
At first please check the following notes:
1.
The PT-8000A is on, receives a constant signal and displays the signal
strength with the dBm scale (see chapter 18 / page 57)
2.
PT-8000A and PC are proper connected according to A1.5 (page
3.
The PC is prepared for audio signal recording (192 kHz)
If note 1 and 2 are ok, but the PT-8000A receiving signal cannot be seen in
the panorama display, check note 3.
Then proceed as follows:
Click in the Windows start menu
Start Settings
Control Panel.
The window
Control Panel
will be opened (Fig.
Double-click the icon
Sounds and Audio Devices.
The window
Sounds and Audio Devices Properties
will be opened (Fig.
Click under Audio tab
in the area Sound recording
the button
Volume...
The Recording Control panel will be opened
(Fig.
12).
A1-
A1-
2)
A1-
10).
A1-
11).
A1-
5