Table of Contents
Advertisement
10
A2-
Abb.
32
A2-
Abb.
33
A2-
A2.10 Update of RX- and ANT-Tuner-CPU
Fig.
A2- 34
On the PC, the update program displays in a message box
the successful transfer of data and points out the automatic
restart of the PT-8000A as well; click OK.
On the PC, another message box appears and points out the automatic restart
of the transceiver after a short waiting period; click OK.
The PT-8000A will now restart automatically with the new MAIN-CPU
software.
If you would like to make no more updates, exit the update program
by clicking the EXIT button.
At this point, an example of the update process for the RX CPU is displayed.
The ANT-Tuner CPU is updated in the same manner.
Pushing RX Update softkey (SOFTWARE menu; Fig.
update process for the RX-CPU. The Display will show the Softwareupdate RX-
CPU screen.
At first a confirmation prompt and a warning notice will be shown (Fig.
The ESC and NO softkeys lead back to the screen and the
softkey menu Softwareversion (Fig.
Confirmation prompt if the RX CPU is really to be updated.
Warning notice: The old version will be deleted and cannot
be restored!
The YES softkey confirms the update process.
Pushing YES confirms the update process. Now the display will prompt to start
the update program on the connected PC (Fig.
16/17) will start the
A2-
A2-
16/17).
A2-
35).
A2-
34).
Advertisement
Table of Contents
