Table of Contents
Advertisement
PT-8000A Operating Manual v2.00.33
8.2
TFT-Display
active RX
(full access through
controls)
Note: Each VFO setting
includes bandwidth and
mode
RX ID
(MAIN/SUB)
DSP Filter Marker
Bandwidth 2nd IF
Filter allocated to
selected VFO
Band Information
or Linear Scale
Selected VFO
allocated Mode
Selected VFO
Frequency + ID
(A/B)
Standby VFO
Frequency + ID
(B/A)
RX: S-Meter
TX: RF Power Meter
Squelch Marker
Softkeys
and
Softkey Menu
The display of the PT-8000A shows relevant data of MAIN- and SUB-RX and
the TX:
All settings for the active RX
Main settings for the RX in the background
General Data for RX and TX
Functions to be activated by the adjacent keys (softkeys)
RX ID
(MAIN/SUB resp.
TRV/CONV)
The six keys (so-called softkeys) right next to the display give access to the
functions named on the display at right border (in the Softkey Menu). The
functions can be: Activate a device function, selection of an adjustment
option, call up of superior or submenu.
Thus adapted softkey menus for almost all pushbuttons on the front panel
allow direct access to many allocated functions.
RX in the background
(limited access through controls)
selected VFO
Operating
S-Meter
Mode
SWR
ALC/COMP
Bandwidth of
Frequency
nd
2
IF filters
Fig. 15
Softkey Menu
Softkeys
13
Advertisement
Table of Contents
