Aeris Epic Operating Manual page 114

114
Upon ascending above 330 FT (100 M), the Current Depth
display will be restored, however Max Depth will only display 3
dashes for the remainder of that dive. Also, the Log for that dive
will display 3 dashes as the Max Depth achieved.
IMMEDIATE VIOLATION AND VIOLA GAUGE MODE
If a Decompression Ceiling Stop Depth much greater than 60 FT
(18 M) is required, an Immediate Violation Mode will be en-
tered. This situation would be preceded by entering Delayed
Violation Mode #2.
The PIC would then operate in Violation Gauge Mode during
the remainder of that dive and for 24 hours after surfacing.
Violation Gauge Mode turns the PIC into a digital instrument
without any decompression or oxygen monitoring functions.
VIOLATION GAUGE DIVE MAIN DISPLAY (Default),
information provided includes (Fig. 102) -
> Full NIBG and UP Arrow, flashing
> Message UP > VIOL, scrolling
> TMT Link icon and Tank Pressure with the PSI (or BAR) icon,
if a TMT is active and linked
> Symbols TIM and NDC with 0:00 (hr:min) Time Remaining
> Tank icon representing the GAS selected (1, 2, or 3)
> Symbol NITROX (if set for Nitrox)
> Current Depth with symbol FT (or M)