Aeris Epic Operating Manual page 66

Refer to page 106
for a description of
the No Decompres-
sion dive mode
Safety Stop feature.
66
SET NORM SAFETY STOP
> Graphic SAF
> Symbols STOP and TIM .
> Safety Stop Time Set Point, flashing.
> Safety Stop Depth Set Point and symbol FT (or M).
 Pressing and releasing the S button momentarily (< 2
seconds each time) will step through the Stop Time Set
Points of OFF, 3:00, and 5:00 (minutes:seconds).
 Pressing and releasing the A button momentarily (< 2
seconds) will save the Stop Time setting and the Stop Depth
Set Point will flash, or if Stop Time is set OFF advance to
the S T CONS (Conservative Factor) screen with the Set
Point flashing.
 Pressing and releasing the S button momentarily (< 2
seconds each time) will step through the Stop Depth Set
Points of 10, 15, and 20 FT (or 3, 4, 5, and 6 M).
 Pressing and releasing the A button momentarily (< 2 sec)
will save the Safety Stop settings and/or advance to the
S T CONS screen with the Set Point flashing.
 Pressing the A button momentarily and repeatedly (< 2
seconds) will step through the other S T U screens.
 Depressing the A and S buttons simultaneously for 2
seconds will save the settings and revert back to the S T U
screen.
information includes (Fig. 59):