Aeris Epic Operating Manual page 142

14
SET FREE CDT STATUS DISPLAY (SURFACE ONLY),
information includes (Fig. 129) -
> Graphics TIMR and S t, solid.
> TIM symbol and Timer setting (min:sec), colon solid,
MINUT Set Point flashing.
 Depressing and holding the S button while the MINUT Set
Point is flashing will scroll through the Set Points at a rate of
4 per second from 0: to 59: in 1 Minute (1:) increments.
 Pressing and releasing the A button momentarily (< 2
seconds) will save the MINUT Set Point displayed and
advance to Set S CONDS with the Set Point flashing.
 Depressing and holding the S button while the S CONDS
Set Point is flashing will scroll through the Set Points at a
rate of 4 per second from :00 to :59 in 1 Second (:01)
increments.
 Pressing and releasing the A button momentarily (< 2
seconds) will save the CD Timer Set Point indicated by the
graphic OFF flashing (Fig. 130) in place of the graphic S t.
 Pressing and releasing S button momentarily (< 2 seconds)
will toggle to ON and start the CD TIM R.
 Pressing the A button momentarily (< 2 sec), or depressing
the M button for 2 seconds, or if no button is pressed
during a period of 2 minutes, will revert the Display to the
FR SURF MAIN screen.