Aeris Epic Operating Manual page 86

86
LOG DATA 1
information includes (Fig. 73):
> Alpha graphic NO-D, D CO, GAUG, or VIOL.
> NIBG with the maximum accumulation segment flashing,
others fixed up to end-of-dive accumulation. All segments
flashing for delayed and full violation.
> Temperature (minimum recorded that dive) and graphic F
(or C if metric).
> Symbol DIV TIM and lapsed Dive Time (hours:minutes).
> Symbols TIM and SURFAC .
> Pre dive Surface Interval time (hr:min), 10 - through 23 - for
times greater than 9 hours and 59 minutes, ‘blank’ for Dive
#1 of a series.
> Maximum Depth and symbol FT (or M).
> Operating Mode symbol NITROX, none if an AIR or GAUG
dive.
 Pressing and releasing the S button momentarily (< 2
seconds) button will advance to the LOG DATA 2 screen.
 Depressing and holding the M button for 2 seconds or if no
button is pressed during a 2 minute period operation will
revert to the NORM SURF MAIN screen.
 Pressing the L button will activate the Backlight.