Aeris Epic Operating Manual page 145

SET FREE DEPTH ALARM 1 (FDA1) DISPLAY,
information includes (Fig. 132) -
> Graphic FDA1.
> Set Point ON or OFF, flashing.
> Depth Set Point graphic value, flashing if ON is displayed.
> Symbols MAX and FT (or M).
 Pressing and releasing the S button momentarily (< 2
seconds) will toggle the Set Point between ON and OFF.
 If set ON, the Depth value displayed will flash.
> Pressing and releasing the S button momentarily and
repeatedly (< 2 sec each time) will step through the Set
Points from 30 to 330 FT (10 to 100 M) in increments of
10 FT (1 M) at a rate of 1 Set Point per press of the button.
> Pressing and holding the S button will scroll through the Set
Points at a rate of 4 Set Points per second until released.
> Pressing the A button momentarily (< 2 sec) will accept the
Depth Setting and advance to S T FR
 If set OFF, pressing the A button momentarily will accept the
Setting and revert operation to the FR
screen, bypassing S T FR
 Depressing the M button for 2 seconds, or if no button is
pressed during a period of 2 minutes, will revert the
Display to the FR
D PTH ALARMS 2 and 3.
SURF MAIN screen.
D PTH ALARM 2.
SURF MAIN
145