Aeris Epic Operating Manual page 77

SERIAL NUMBER (EPIC)
 Depressing the A and S buttons simultaneously for 8
seconds while viewing the NORM SURF MAIN screen will
access the PIC's S RIAL NUMB R screen displaying (Fig.
67):
> Graphic SN
> Factory programmed Serial Number of the PIC.
> Firmware revision number (e.g., graphic r1A).
 Depressing the A and S buttons simultaneously for 2
seconds will revert to the NORM SURF MAIN screen.
 Depressing and holding the M button for 2 seconds will
revert to the NORM SURF MAIN screen.
 If no button is pressed during a period of 2 minutes, the unit
will revert to the NORM SURF MAIN screen.
NOTE: The Serial Number and Firmware Revi-
sion will be requested in the event that you
contact AERIS regarding the EPIC. Enter them in
the Records section provided in the back of this
Manual.
SN and Firmware
Rev are set by the
factory and cannot
be changed by the
user.
77