Set Minutes - Aeris Epic Operating Manual

8
When a set Countdown Time reaches 0:00, the Audible Alarm
will beep 10 times and the red L D warning light will flash.
 Pressing and releasing the S button (< 2 seconds) will
acknowledge and silence the Alarm.
 Pressing and releasing the S button (< 2 seconds) will
silence and acknowledge the Daily Alarm (if its set and it
sounds).
 Pressing the L button will activate the Backlight.
 Depressing and holding the M button for 2 seconds will
revert to the Local Default Watch Time screen (MAIN or
ALT RNAT TIM ).
 Depressing both the A and S buttons simultaneously for 2
seconds will access the
TIMER
screen indicated by the graphics TIMR and S t,
symbol TIM , and HOUR Set Point flashing (Fig. 19).
 If no button is pressed during a period of 2 minutes, the unit
will revert to the Local Default Watch Time screen.
 Depressing and holding the S button while the
Point is flashing will scroll through the Set Points in 1 hour
increments at a rate of 4 per second from 0: to 23: (hr).
 Pressing and releasing the A button momentarily (< 2
seconds) will save the HOUR Set Point and/or advance to

SET MINUTES

SET WATCH COUNT DOWN
with the MINUT S Set Point flashing.
HOUR
Set