Aeris Epic Operating Manual page 37

Stop Depth
During a No Decompression Safety Stop, the set
a
c
(Fig. 30a) is displayed and during a Decompression condition,
Ceiling Stop Depth
the required is displayed.
Time and Date Displays
Time of Day and NORM/GAUG Mode displays
are
shown in hour:minute format (i.e., 1:16 represents 1 hour and
FREE Dive Mode displays
16 minutes, not 116 minutes!).
b
are shown in minute:second format. The colon that separates
hours and minutes (minutes and seconds) blinks once per second
when the display is indicating real time (e.g., Surface Interval,
lapsed Dive Time), and is solid (non-blinking) when times are
calculated projections (e.g., Time to Fly, Plan).
Primary Time
The display, at the bottom of the screen, has the
time
largest digits of the display (Fig. 30b). Another display
(Fig. 30c) is located in the middle row. Both displays are
a
identified by the symbol TIM .
Date
When the PIC is operating in Dive Computer mode, is
displayed only to identify dives when they are accessed in the
LOG Mode (Fig. 31). When Units of Measure are set for
Imperial, Month appears to the left of Day (Fig. 31a) separated
by a decimal point (month.day). When set for Metric units, the
Month appears to the right of Day (day.month).
37