Gauge Mode - Aeris Epic Operating Manual

GAS 1 and TMT 1
are the Defaults for
GAUG Mode, GAS
2/3 and TMT 2/3
are not available in
GAUG Mode.
134

GAUGE MODE

When Gauge Mode (GAUG) is selected as the Operating
Mode, the PIC will operate as a Digital Depth Gauge/Timer
without performing nitrogen and oxygen calculations.
 To access GAUG Operating Mode while Watch MAIN
TIM is displayed, press the M button 2 times (2 seconds
each time), or while the NORM SURF MAIN screen is
displayed, press the M button 1 time for 2 seconds.
 If no GAUG dive has be conducted, press the M button for
2 seconds to advance to the FR
MAIN TIM > NORM SURF > GAUG SURF > FR
GAUG SURF MAIN DISPLAY (Default),
information provided includes (Fig. 122) -
> Graphic GAUG alternating with the Altitude Level graphic
S A (or L2 through L13) and W T (if the unit is wet).
> Battery icon if an PIC Low Battery Warning Condition
exists, flashing if Too Low.
> LINK icon and Tank Pressure with symbol PSI (or BAR), if the
Receiver is Linked with an active TMT.
> Symbol DIV and Number of that dive.
> Symbols TIM and SURF, and Surface Interval Time (hr:min).
SURF MAIN Display.
SURF