Aeris Epic Operating Manual page 64

Prior to the first dive
of a repetitive
series, W T Activa-
tion must be set ON
for the PIC to enter
Dive Mode while
operating as a
Watch.
64
SET WET ACTIVATION
> Graphic W T
> Set Point graphic ON (or OFF) flashing.
 Pressing and releasing the S button will toggle between ON
and OFF.
 Pressing and releasing the A button momentarily (< 2
seconds) will save the setting and/or advance to the S T
UNITS screen with the Set Point flashing.
 Pressing and releasing the A button momentarily and
repeatedly (< 2 seconds each time) will step through the
other S T U screens.
 Depressing the A and S buttons simultaneously for 2
seconds will save the setting and revert back to the S T U
screen.
 Depressing and holding the M button for 2 seconds or if no
button is pressed for a period of 2 minutes operation will
revert to the NORM or GAUG SURF MAIN screen.
HINT: To change this setting while operating in
FREE Mode, first access the NORM SURF Mode.
information includes (Fig. 57):