Aeris Epic Operating Manual page 72

7
SET TMT -3 USE
> Graphics TMT and 2-3 US .
> Set Point graphic S LF (or bud) flashing.
 Pressing and releasing the S button momentarily (< 2
seconds) will toggle between S LF and bud.
 Pressing and releasing the A button momentarily (< 2
seconds) will accept the setting and/or advance to S T
TMT 2 with ON or OFF flashing.
 Depressing the A and S buttons simultaneously for 2
seconds shall save the setting and revert back to the S T U
screen.
 Depressing and holding the M button for 2 seconds or if no
button is pressed for a period of 2 minutes operation will
revert to the NORM or GAUG SURF MAIN screen.
When set for S LF, TMT 2 and TMT 3 are associated with
Transmitters to be used by a diver using the PIC for Gas Switch-
ing.
When set for BUD, TMT 1 is associated with the user of the PIC
and TMT 2 and TMT 3 are associated with Transmitters to be
used by other divers (Buddies) whose Pressure can be checked
by the user of the PIC.
information includes (Fig. 64):