Aeris Epic Operating Manual page 24

4
Displayed on the
Month and Day (or Day and Month if set for metric) with the
YEAR
Set Point flashing (Fig. 13).
 Depressing and holding the S button while the Y AR Set
Point is flashing will scroll through the Set Points in 1 year
increments at a rate of 4 per second from 2006 to 2049
(with leap year corrections).
 Pressing and releasing the A button momentarily (< 2 sec)
will save the Year Set Point and/or advance to
MONTH
with the Set Point flashing and the graphic MNTH
(Fig. 14).
NOTE: The YEAR will not be displayed in any
Mode other than SET DATE. The DATE will reset
to 1.1 006 when the Battery is replaced.
 Depressing and holding the S button while the MONTH Set
Point is flashing will scroll through the Set Points in 1 month
increments at a rate of 4 per second from 1 to 12.
 Pressing and releasing the A button momentarily (< 2
seconds) will save the Month Set Point and/or advance to
SET DAY
with the Set Point flashing and the graphic DAY
(Fig. 15).
SET DATE
screen will be the graphic Y AR,
SET