Aeris Epic Operating Manual page 127

TO BUDDY PRESSURE CHECK ON SURFACE
A Buddy Pressure Check can be accomplished when on the
Surface by accessing the TMT Status Check screens while the
NORM SURF MAIN screen is being displayed.
 Depressing and holding the S button for 2 seconds will
activate the PIC's Receiver and access the TMT Status
screens and Pressures of the Tanks reporting.
 TMT 2 and TMT 3 Battery Status is not displayed when TMT
2-3 US is set for BUD (Buddy Pressure Check).
 If a TMT is not active and linked to the PIC, the message
NotAvAil (Not Available) will appear.
 ach screen will be displayed for 3 seconds. PIC Battery
Status, then TMT 1 Battery Status and Pressure (Fig. 116),
then BUD 1 (TMT 2) Pressure (Fig. 117), then BUD 2 (TMT
3) Pressure (Fig. 118).
 The screen will then revert to the NORM SURF MAIN
screen.
1 7