Set A Group (Norm/Gaug Alarms) - Aeris Epic Operating Manual

54
 Pressing and releasing the A button momentarily (< 2
seconds) will save the setting and revert to the S T F
screen.
 Pressing and releasing the A button momentarily and
repeatedly (< 2 seconds) will step through the other S T F
screens.
 Depressing and holding the M button for 2 seconds or if no
button is pressed for a period of 2 minutes operation will
revert to the NORM or GAUG SURF MAIN screen.

SET A GROUP (NORM/GAUG ALARMS)

Set A Sequence:
S T A > Audible > Depth > DT > NIBG > DTR > Turn Pressure
> nd Pressure > PO2
HINT: The SET A Group can also be set/changed
using the PC Settings Upload program.
> S T A Settings remain at the values set until changed.
> Depressing the A and S buttons simultaneously for 4
seconds while NORM or GAUG SURF MAIN is displayed
will access S T A identified by the graphic S TA (Fig. 47).
> Pressing and releasing the A button momentarily (< 2
seconds) while S T A is displayed will advance to S T
AUDIBL ALARM with the Set Point flashing.