Care And Cleaning; Inspections And Service - Aeris Epic Operating Manual

156

CARE AND CLEANING

Protect your PIC from shock, excessive temperatures, expo-
sure to chemicals, and tampering. Protect the lens against
scratches with a Instrument Lens Protector. Small scratches will
naturally disappear underwater.
 Soak and rinse the PIC in fresh water at the end of each
day of diving, and check to ensure that the areas around
the Low Pressure (Depth) Sensor (Fig. 143a), PC Interface
Data Port (Fig. 143b), and Buttons are free of debris or
obstructions. Soak and rinse the Regulator(s) with the
Transmitter(s) attached.
 To dissolve salt crystals, use lukewarm water or a slightly
acidic bath (50% white vinegar/50% fresh water). After
removal from the bath, place the PIC and the Regulator(s)
with Transmitter(s) unit under gently running water and
towel dry before storing.
 Transport your PIC system cool, dry, and protected.
b

INSPECTIONS AND SERVICE

Your PIC should be inspected annually by an Authorized
A RIS Dealer who will perform a factory prescribed function
check and inspection for damage or wear. To keep the 2 year
limited warranty in effect, this inspection must be completed
a
one year after purchase (+/- 30 days).