Aeris Epic Operating Manual page 79

NOTE: When the Conservative Factor is set ON,
No Decompression Dive times are reduced to the
values of the next 3000 foot (915 meter) higher
Altitude.
If FO2 for GAS1 is set for a numerical value (21 to 50%), the
NITROX graphic and Maximum Operating Depth defined by the
PO2 ALARM Set Point will be displayed.
If the limiting time factor is Oxygen controlled, the symbols TIM
and O2 will be displayed.
If Nitrogen controlled, the symbols TIM and NDC will be
displayed.
 Prior to a first dive of a series, pressing and releasing the A
button momentarily (< 2 seconds) will advance to LOG
MOD (PLAN Lead-in > LOG > HISTORY > NORM SURF).
 After a dive is made, it will advance to FLY MOD (PLAN
Lead-in > FLY > SAT > LOG > HISTORY > NORM SURF).
 Depressing and holding the M button for 2 seconds or if no
button is pressed during a 2 minute period operation will
revert to the NORM SURF MAIN screen.
Refer to the charts on
pages 166 and 167
for complete listings of
No Decompression
Limits for Sea Level and
Altitudes up to 14,000
feet (4,270 meters).
79