Aeris Epic Operating Manual page 109

DECO STOP MAIN Display (Default),
information provided includes (Fig. 94) -
> Nitrogen Bar Graph (all segments indicating D CO)
> Graphic message D CO > STOP > xxF or xxM, scrolling
> TMT Link icon and Tank Pressure with the PSI (or BAR) icon,
if a TMT is active and linked
> Stop Time (hr:min) with symbols STOP and TIM
> Total Ascent Time with symbols TIM and TAT
> Symbol NITROX (if set for Nitrox)
> Current Depth with symbol FT (or M)
 While the D CO STOP MAIN screen is displayed, press/
release the A button (< 2 sec) to view D CO STOP ALT 1.
 While the D CO STOP ALT 1 screen is displayed, press/
release the A button (< 2 sec) to view D CO STOP ALT 2.
 Press/hold the M button (2 sec) to access the TMT 2-3 US
screen and Gas Switch Routine (or Buddy Pressure Check).
Total Ascent Time
Total Ascent Time (Fig. 94a) includes Stop Times required at all
required decompression ceilings and vertical Ascent Time
calculated at 60 FPM (18 MPM) for depths deeper than 60 FT
(18 M), and 30 FPM (9 MPM) for depths of 60 FT (18 M) and
shallower.
a
109