Aeris Epic Operating Manual page 162

16
NOTE: The EPIC's O-ring must be a genuine
AERIS part that can be purchased from an Au-
thorized AERIS Dealer. Use of any other O-ring
will void the warranty.
 Carefully place the Battery Hatch (with O-ring) into position
on the rim of the Battery Compartment, then press it evenly
and completely down into place.
 Maintain the Battery Hatch securely in place and turn it
counter clockwise 10 degrees using the special Battery
Hatch tool provided (Fig. 150), or by pushing the lower
portion to the right while pushing the upper portion to the
left (Fig. 151).
Transmitter Battery Installation
 Lightly lubricate the new Battery Cap O-ring with silicone
grease and install it onto the Battery Cap. DO NOT roll
the O-ring over the Threads, instead stretch it slightly to
work it down over the slotted end of the Cap into the
Groove at the Base of the Threads (Fig. 152).
NOTE: The TMT's O-ring must be a genuine
AERIS part that can be purchased from an Au-
thorized AERIS Dealer. Use of any other O-ring
will void the warranty.