Aeris Epic Operating Manual page 30

30
 During the first 4 seconds the 1/100th second values will
be displayed, then 2 dashes ( . - - ) will be displayed. The
1/100th values will be recorded and displayed when LAPs
are frozen and when later recalled.
 Subsequent pressing and releasing of the S button (< 2
seconds each) will freeze Lap Times (LAP1 through LAP9).
After 9 Laps are recorded, additional LAPs will replace
LAP9, shift the others to lower LAP numbers, while
discarding LAP1.
 If is Timer reaches 99:59:59.99 hr:min:sec.1/100 sec), it
will stop and save that number as a LAP. Subsequent
presses of the S button will then have no effect.
 Pressing and releasing the A button momentarily (< 2
seconds) will Stop the Timer and Recall LAP1, displaying
the graphic LAP1 (flashing) and the LAP 1 Time. Repeat
presses will display other LAPs/Times (Fig. 22).
 Depressing and holding the A button for 2 seconds will stop
the Timer and reset the Time to 0:00:00.00 (flashing).
 Pressing and releasing the M button momentarily (< 2
seconds) will advance to DAILY ALARM.
 Depressing and holding the M button for 2 seconds will
revert to the Local Default Watch Time screen.
While the Chronograph is running, it will remain on the screen
until a button operation is performed. If another screen is
accessed, it will then continue to run in the background.