Operating Mode Structure - Aeris Epic Operating Manual

OPERATING MODE STRUCTURE

Unless it is operating in Dive Computer mode, the PIC will be
ON in the default WATCH MAIN TIM (home time) mode (Fig.
1), like a standard WATCH, until the Mode is changed.
The M button is used to access 4 other Modes that include
Alternate Time Mode, Countdown Timer, Chronograph (stop
watch/lap timer), and Daily Alarm. It is also used to revert to
the Local Default Time display and access Computer Modes.
The screens of the Main Modes and Sub Modes will remain on
display until a button is pressed to access another screen or
Mode, activate a sequence, or for 2 minutes if no button is
pressed. The Chronograph remains on display as long as it is
running unless another Mode is accessed.
When Wet Activation is set On, the PIC will enter selected Dive
Mode upon descent to 5 FT (feet)/1.5 M (meters), regardless of
what operating Mode it is in.
WARNING: When Wet Activation is set OFF, the
EPIC must be in Dive Surface Mode (NORM<
GAUG, or FREE prior to the first dive of a new
series. Commencing a dive while in Watch
modes will not activate Dive Mode unless Wet
Activation is set ON.
ain Sequence
(while at home)
ain Time
Alternate Time
Countdown Timer
Chronograph
Daily Alarm
Alternate Sequence
(at a travel location)
Alternate Time
ain Time (home)
Countdown Timer
Chronograph
Daily Alarm
11