Timing Belt - Mitsubishi 3000GT Service Manual

TIMING BELT

REMOVAL AtiD INSTALLATION
Pre-removal Operation
Under Cover (Front L.H., Side L.H.) Removal
l
Front Under Cover Panel Removal
l
(Refer to GROUP 51 - Aero Parts.)
Cruise Control Pump and Link Assembly Removal
l
(Refer to GROUP 13G - Cruise Control.)
Generator Assembly Removal
l
(Refer to GROUP 16 - Generator.)
Raise and Suspend the Engine to the Extent Force
l
is not Applied to the Engine Mount
7:
Removal steps
1. Air hose
2. Air pipe
3. Tensioner assembly
4. Drive belt (power steering)
(Refer to P.ll-8.)
6. Brake fluid level sensor
7. Timing belt upper cover
8. Engine mount bracket
9. Idler pulley (generator/airconditioning)
ENGINE - Timing Belt
72-87 ft.lbs.
. .
Revision
TSB
Post-installation Operation
Generator Assembly installation
l
(Refer to GROUP 16 - Generator.)
Under Cover (Front L.H., Side L.H.) Installation
l
Front Under Cover Panel Installation
l
Cruise Control Link Assembly Installation <Vehicle
l
with Cruise Control>
(Refer to GROUP 13G - Cruise
Engine Adjustment (Refer to F!ll-7.)
l
7-9 ft.lbs.
m
2.9 ft.lbs.
11. Camshaft position
crankshaft position sensor connector*
l
NOTE
From 1993 model
Up to 1993 model
l 2
From 1994 model
Control.)
7-9 ft.lbs.
A
sensor and