Mitsubishi 3000GT Service Manual page 430

INTAKE AND EXHAUST
Air intake hose A
Air intake hose B
Air
Matchmark
l
Matchmark
l
Hose end...paint
Pipe end...protrusion
Air hose D
REMOVAL SERVICE POINT
Disconnect the hose from the engine oil cooler and remove
the engine oil cooler only.
INSTALLATION SERVICE POINTS
AIR INTAKE HOSE A INSTALLATION
Engaging the notch with the A mark at points indicated by
the arrows, insert air intake hoses B and C until seated.
Insert the turbocharger end of air intake hoses B and C com-
pletely.
AIR HOSE E / AIR HOSE B / AIR HOSE G
INSTALLATION
Aligning the marks at the points indicated by the arrows,
insert securely into the stepped portion of the pipe or until
s e a t e d .
Caution
Charge
air
Be careful not to allow any foreign matter to get into
cooler
the hoses, pipes, or the charge air cooler itself.
left
AIR HOSE C INSTALLATION
Aligning the marks at the points indicated by arrows, insert
securely into the stepped portion of the pipe.
Caution
Be careful not to allow any foreign matter to get into
the hoses, pipes, or the charge air cooler itself.
INSPECTION
Check the charge air cooler fins for bending, damage,
l
or foreign matter.
Check the charge air cooler hoses for cracking, damage,
l
or wear.
TSB Revision