Mitsubishi 3000GT Service Manual page 797

REAR SUSPENSION cFWD> - Trailing Arm
Parking Brake Lever Stroke Check
l
(Refer to GROUP 36 - On-vehicle Service.)
18
160 Nm* 2
140-
116 ft.lbs.*
101-
Removal steps
Brake caliper mounting bolt
Brake caliper
3:
Brake tube clamp bolt
4.
Rear brake disc
Hub cap
Wheel bearing nut
7:
Rear hub assembly
Parking brake cable clamp bolt
Parking brake cable end (Refer to
GROUP 36 - Parking Brake.)
10. Rear speed sensor clamp bolt CABS>
ABS speed sensor CABS>
Backing plate
Rear Brake Disc Run-out Check
l
(Refer to GROUP 35 - On-vehicle Service.)
q
13<
NOTE
TSB Revision
83 Nm
60 ft.lbs.
36-43 ft.lbs.
Stabilizer link mounting nut
Self-locking nut
Shock absorber mounting bolt (upper)
16.
Self-locking nut
nut
Self-locking
17.
Trailing arm mounting bolt and nut
Trailing arm assembly
Indicates parts which should be temporarily tightened, and
then fully tightened with the vehicle on the ground in the
unladen condition.