Mitsubishi 3000GT Service Manual page 627

AUTOMATIC TRANSAXLE
10. Torque converter
clutch solenoid
solenoid valve connector and the transmission
case.
Solenoid valve
connector terminals
Standard value: 3 fY2O"C (68°F) <1992,1993
models> 13 .M?O"C (68°F) <From 1994 mod-
1: PCS"
els>
2: TCC
solenoid
3: SCSV-A
4: SCSV-B Connect 12 V between the transmission case -+ No
and terminal 2; switch ON and OFF and check
for operation noise.
Noise exists.
Accelerator switch
the resistance between terminals 1 and 2.
Continuity exists (resiitance: 0)
With the accelerator pedal depressed slightly
nals 1 and 2.
No continuity (resistance: -)
I
1
TSB Revision
connected wiring.
Replace the TCC solenoid.
operation noise.
Foreign terminal caught be-
Check for sticking.
l
(Valve stroke: in.) or
less)
Replace the TCC solenoid.
*Sticking is usually 1
at the release side.
Check the installation of the ac-
(resistance: -)
Replace the accelerator switch.