Mitsubishi 3000GT Service Manual page 748

POWER PLANT MOUNT
REMOVAL AND INSTALLATION
Pre-removal Operation
Under Cover Removal
l
(Refer to GROUP 51 - Front Bumper.)
CAUTION: SRS
Before removal of steering gear box, refer to
GROUP 528 - SRS, center front wheels and
remove ignition key. Failure to do so may dam-
age SRS clock spring and render SRS system
inoperative, risking serious driver injury.
No. 1 crossmember, Left member,
Right member
60-70
11
90 Nm /
65 Klbs.
60-70
No. 1 crossmember, left member,
right member removal steps
1. Cover installation screw
2. Left member
3. Clutch vacuum hose connection
4. Vacuum tank installation bolt <Turbo>
5. Right member
6. Vacuum tank <Turbo>
Nm
Nm
TSB Revision
Post-installation Operation
Under Cover Installation
l
(Refer to GROUP 51 - Front Bumper.)
Power-steering Fluid Air Bleeding
l
(Refer to GROUP 37A - Service Adjustment
Procedures.)
Front Wheel Alignment Adjustment
l
(Refer to GROUP 33A - Service Adjustment
Procedures.)
Transfer Oil Supplying <AWD>
l
(Refer to GROUP 00 - Maintenance Service.)
60-70 Nm
43-51 ft.lbs.
7. Front roll stopper installation bolt
8. No. 1 crossmember installation nut
9. Lower plate
10. No. 1 crossmember
11. Stopper(B)
12. Bushing (B)
43-51 ft.lbs.