MANUAL TRANSAXLE <FWD>
REMOVAL AND INSTALLATION
(Refer to GROUP 51 - Front Bumper.)
Removal steps
1. Side under cover
2. Battery
3. Battery seat, washer tank
4. Air cleaner cover, air intake hose
5. Clutch release cylinder connection
Post-installation Operation
Front Under Cover Installation
l
(Refer to GROUP 51 - Front Bumper.)
Transmission Oil Supplying (Refer to P.22-4.)
l
Engine Coolant Filling (Refer to GROUP 14- Service
l
Adjustment Procedures.)
Shift Lever at Each Position Checking Operation
l
Meters and Gauges Checking Operation
l
19 Nm
6. Clutch tube bracket
assembly connection
7. Transaxle control cable connection
8. Speedometer cable <Up to 1993
models> or speedometer connector
0 0 0 0 1 5 3 2
and clutch damper