AUTOMATIC TRANSAXLE - Troubleshooting
In the "P" range, check for continuity between
terminals 3 and 4, and terminals 7 and 8.
In the "R" range, check for continuity between
teninals 2 and 3, and terminals 5 and 6.
ZTFA0802
In the "R" range, check for continuity between
terminals 2 and 3. and terminals 5 and 6.
In the "D" range, check for continuity between
terminals 3 and 10.
In the "2" range, check for continuity between
terminals 3 and 11
Continuity exists
In the "L" range, check for continuity between
terminals 3 and 9.
Normal
TSB Revision
1
I
1
Poor contact, or damaged
or disconnected wiring.
Replace the park/neutral
position switch.