27-4
REAR AXLE HUB
REMOVAL AND INSTALLATION
36-43 ft.lbs.
R e m o v a l s t e p s
l b
1. Rear speed sensor
2. Caliper assembly
3. Brake disc
Hub cap
4.
6. Tongued washer
Pole pie/cc
REAR AXLE cFWD>
REMOVAL SERVICE POINTS
WITH ABS>
Caution
Be careful when handling the pole piece at the tip of
the speed sensor and the toothed edge of the rotor so
as not to damage them by striking against other parts.
Remove the caliper assembly and suspend it with a piece
of wire.
TSB Revision
7. Rear hub assembly
8. Rear rotor <Vehicles with ABS>
9. Rear hub unit bearing
Caution
Rear hub unit bearing cannot be disassembled.