FUEL FILTER
REMOVAL AND INSTALLATION
Removal
steps
1. Battery
2. Battery
tray with washer tank
3. Eye bolt
4. Gasket
5. High pressure fuel hose
Eye bolt
Eye bolt
FUEL SUPPLY
.
.
REMOVAL SERVICE POINT
Remove the eye bolt while holding the fuel filter nut securely.
Caution
Cover the hose connection with rags to prevent splash
of fuel that could be caused by some residual pressure
in the fuel pipe line.
INSTALLATION SERVICE POINT
(1) When installing the fuel filter, first temporarily install the
filter to the filter bracket; then insert the main pipe at
the connector part of the high pressure fuel pipe, and
manually screw in the main pipe's flare nut.
(2) Holding the fuel filter nut, tighten the fuel main pipe's
flare nut and eye bolt at the specified torque. Then tighten
the filter to the bracket.
TSB Revision
25 ft.lbs.
6. Fuel main pipe connection
7. Mounting bolt
8. Fuel filter
9. Eye bolt
10. Gasket
11. High pressure fuel pipe