Mitsubishi 3000GT Service Manual page 255

MULTIPORT On-Vehicle Inspection of MFI
FUEL INJECTION - Components
short-circuit between the rear
bank injector and the engine con-
trol module.
Connector: Disconnected
l
Engine control module con-
l
nector: Disconnected
ACTUATOR INSPECTION
INJECTORS
Measurement of Resistance between Front Bank
Terminals
(1) Disconnect the injector connector.
(2) Measure the resistance between terminals.
Standard value: 2-3 0 [at 20°C (SS'F)]
(3) Reconnect the injector connector.
Measurement of Resistance between Rear Bank
Terminals
(1) Disconnect the injector connector.
(2) Measure the resistance between terminals.
Standard value: 2-3 L2 [at 20°C (68"F)]
(3) Reconnect the injector connector.
TSB Revision