AUTOMATIC TRANSAXLE - Troubleshooting
INSPECTION OF ELECTRONIC CONTROL SYSTEM COMPONENTS
Based on the wiring diagram check whether the
continuity and grounding of each harness is OK.
Continuity
Normal
1: Low temperature side
2: Ground
3: High temperature side
3. Oil-temperature
sensor
ture to high temperature and check the resis-
Changes of the resistance continuous and
smooth.
Normal
ZTFA0821
1: Oil temperature sensor
2: Ground
TSB Revision
lmproperconnectionof connec-
Reconnecttheconnector; repair
or replace the harness.
Damaged or disconnected wir-
ing
(resistance: -)
Replace the oil-temperature
sensor