Lsd Case Assembly - Mitsubishi 3000GT Service Manual

DISASSEMBLY AND REASSEMBLY
Disassembly steps
1. Screw
2. Differential case A
4. Viscous unit ' '
5. Pinion mate washer
gear (right)
(right)
REAR AXLE <AWD>
BEFORE DISASSEMBLY CHECK
DIFFERENTIAL GEAR BACKLASH CHECKING
(1) Secure the differential case assembly in a vise so that
the differential side gear (right) is facing upward.
Caution
When securing the vise, be sure not to hold the
differential case assembly too tightly.
(2) Insert a 0.03 mm (.0012 in.) feeler gauge at two places
(diagonally) between differential case B and the thrust
washer (right).
Caution
Do not insert a feeler gauge in the oil groove of
differential case B.
TSB Revision
LSD Case
Assembly
6. Differential pinion mate
7. Differential pinion shaft
8. Differential side gear (R.H.)
9. Thrust washer (R.H.)
10. Differential case B