4-5 Accommodating Various Kinds of Media
Using Transparent Media
Procedure
MENU
SUB MENU
EDGE DETECTION
ENABLE
SETUP SHEET
Description
This setting enables or disables detection of the leading and trailing edges of the media. It is normally set to "ENABLE."
When transparent media is loaded, set it to "DISABLE."
When [EDGE DETECTION] is set to "DISABLE," printing operation does not stop when the media runs out. If media runs out
while printing is in progress, immediately press
like may become soiled by ink or that ink may get inside and damage the machine.
Default Setting
[EDGE DETECTION]: ENABLE
4
Printing Hard-to-dry Media
Procedure
MENU
SUB MENU
SUB MENU
SCAN INTERVAL
SCAN INTERVAL
OFF
W1200mm
SETUP SHEET
Description
You use this when ink dries poorly even when the media heating system is used. Larger values produce progressively slower
movement of the media, enabling you to extend the drying time accordingly. Printing time takes correspondingly longer.
You can also make this setting on the computer. When you have made the setting on the computer, the computer's setting
is used and the printer's setting is ignored.
78
Press
Press
Press
Use
DISABLE
Press
The settings are changed and the screen shown in the figure appears.
Press
Press
Press
Press
Press
Use
1.0 sec
Press
Press
.
several times.
twice.
to select "DISABLE."
to enable the setting.
to quit printing. Otherwise, there is a chance that the platen or the
.
several times.
.
.
.
to set the value.
.
to go back to the original screen.