Making Various Adjustments For Cutting; Making The Cutting Conditions Set On The Machine Take Precedence; Fine-Tuning The Cutting Conditions - Roland VersaCamm VP-540i User Manual

4-8 Making Various Adjustments for Cutting

Making the Cutting Conditions Set on the Machine Take Precedence

Procedure

MENU
CUTTING MENU

CUTTING MENU
CUTTING PRIOR

CUTTING PRIOR
COMMAND MENU

W1200mm
SETUP SHEET
Description
You can also make the settings for the cutting conditions using the computer. By default, the settings made with the computer
take priority. To make the cutting conditions set on the machine take priority, either turn off the settings of the computer or
make the setting described above.
Default Setting
[CUTTING PRIOR]: COMMAND

Fine-tuning the Cutting Conditions

Procedure

FUNCTION
CUT CONFIG

CUT CONFIG
FORCE

FORCE
50 gf 60 gf

W1200mm
SETUP SHEET
Press .
Press .
Press .
Press twice.
Press .
Use to select "MENU."
Press to enable the setting.
Press to go back to the original screen.
Press .
Press several times.
Press .
Use to choose the cutting condition you want to
set.
Press .
Use to enter the value.
Press to enable the setting.
Press to go back to the original screen.
4
89