Table of Contents
Advertisement
4-3 Saving the Printer Settings to Match the Media
Saving Optimized Media Settings As Preset Values
Procedure
MENU
PRESET
PRESET
SAVE
SAVE
NAME1
W1200mm
SETUP SHEET
Description
Using the [PRESET] menu lets you easily change a wide variety of settings to optimize them for the media.
Making changes for each menu item every time you change the media can be troublesome. That's why it can be useful to
save the menu-item settings optimized for an often-used type of media as a preset. The next time you use the media, you
can change the menu-item settings to the optimal values for the media simply by loading the preset you saved.
Menu items that can be saved in presets are listed below.
4
[PRINT] (Print heater), [DRYER]
P. 39, "Settings for the Media Heating System"
[EDGE DETECTION]
P. 78, "Using Transparent Media"
[SCAN INTERVAL]
P. 79, "Preventing Media from Coming Loose"
[FULL WIDTH S]
P. 79, "Speeding Up Output for Narrow Media"
[FEED FOR DRY]
P. 88, "Drying the Trailing Edge of the Printing Area on
the Dryer"
[CALIBRATION]
(in the [CUTTING MENU])
P. 77, "Performing Distance Correction During Cutting"
[FORCE], [SPEED], [OFFSET], [UP-SPEED]
P. 89, "Fine-tuning the Cutting Conditions"
Up to eight types of presets can be saved. You can assign a name to each one. Using media names for these may aid recogni-
tion and clarity.
P. 71, "Loading a Saved Preset," "Assigning a Name to a Preset"
70
Press
.
Press
.
Press
.
Press
.
Use
to select any one from "NAME1" to
"NAME8."
Press
to save.
The present menu settings are saved in the preset you chose in step
Press
to go back to the original screen.
[ADJUST BI-DIR SIMPLE SETTING]
ing"
[ADJUST BI-DIR DETAIL SETTING]
More Precisely"
[CALIBRATION]
Bands and the Like"
[PRINT-CUT ADJ.]
ting Positions"
[CROP-CUT ADJ.]
When Using Crop Marks"
[PREHEATING]
Operates"
P. 73, "Correcting for Misalignment in Bidirectional Print-
P. 74, "Correcting for Misalignment in Bidirectional Printing
P. 76, "Performing Feed Correction to Alleviate Horizontal
P. 92, "Correcting Misalignment of the Printing and Cut-
P. 98, "Correcting Misalignment for Printing and Cutting
P. 87, "Determining How the Media Heating System
.
Advertisement
Table of Contents
