Making The Setting For Blade Force - Roland VersaCamm VP-540i User Manual

Making the Setting for Blade Force

Procedure

FUNCTION
CUT CONFIG

CUT CONFIG
FORCE

FORCE
50 gf 60 gf

FORCE
60 gf 60 gf

W1200mm
SETUP SHEET
At the [CUT CONFIG] menu, you can also make settings for other cutting conditions in addition to the blade force. Refer to
the following pages.
 P. 89, "Fine-tuning the Cutting Conditions"
Press .
Press several times.
Press .
Press several times.
Press .
Use to enter the value.
Press .
This completes the settings.
Press to go back to the original screen.
2-6 Performing Cutting
47
2