Roland EU-1000MF Manual
  1. Manuals
  2. Brands
  3. Roland Manuals
  4. Printer Accessories
  5. EU-1000MF
  6. Manual
Roland EU-1000MF Manual

Roland EU-1000MF Manual

Special color ink
Hide thumbs Also See for EU-1000MF:
Table of Contents

Advertisement

Quick Links

Download this manual
This manual describes how to print using spot color ink.
Spot color inks such as gloss and white can be used as a base for
printing color images or as a surface layer for adding gloss to color
prints.
Thank you very much for purchasing this product.
• To ensure correct and safe usage with a full understanding of this product's performance, please be sure to read
through this manual completely and store it in a safe location.
• Unauthorized copying or transferal, in whole or in part, of this manual is prohibited.
• The specifications of this product and the contents of this operation manual are subject to change without notice.
• The operation manual and the product have been prepared and tested as much as possible. If you find any
misprints or errors, please inform us.
• Roland DG Corporation assumes no responsibility for any direct or indirect loss or damage that may occur through
use of this product, regardless of any failure to perform on the part of this product.
• Roland DG Corporation assumes no responsibility for any direct or indirect loss or damage that may occur with
respect to any article made using this product.
Special Color Ink Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EU-1000MF and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Roland EU-1000MF

Summary of Contents for Roland EU-1000MF

  • Page 1 • Roland DG Corporation assumes no responsibility for any direct or indirect loss or damage that may occur through use of this product, regardless of any failure to perform on the part of this product.
  • Page 2 Company names and product names are trademarks or registered trademarks of their respective holders. http://www.rolanddg.com/ Copyright © 2021 Roland DG Corporation...

  • Page 3: Table Of Contents

    Contents Contents ......................................1 Overview ......................................2 Spot Color Printing .................................2 Workflow and Software Used .............................2 Available Print Types ..............................3 Print Data Types ................................4 Printing ........................................5 Creating Print Data for Spot Colors ..........................5 Creating a RIP File ................................7...

  • Page 4: Overview

    Can be used to create a RIP file with registered SAi FlexiPRINT Production RIP software printing conditions, layout settings, and spot Manager Roland Edition color information. Can be used to load RIP files, to configure Printing software Print Exp spot color settings, and to perform printing operations.

  • Page 5: Available Print Types

    Overview Available Print Types This section describes the types of printing that use white ink (Wh) and gloss ink (Gl). Print types Print Control can be used to specify the combination of color ink, white ink and gloss ink. Cyan, magenta, yellow, and black are referred to as 4C.

  • Page 6: Print Data Types

    Spot color printing Pattern printing Pattern Spot color placed on base Pattern printing Spot color printing Pattern MEMO Even without creating print data for spot colors, spot color settings can be configured using the "Print Exp" printing software. " EU-1000MF User's manual...

  • Page 7: Printing

    Printing Creating Print Data for Spot Colors This section describes how to create the following print data using Adobe Illustrator. Laminate the pattern using gloss spot color, and print white spot color on the base. Gloss spot color laminated on pattern (Overprint) Pattern with a white spot color base (Overprinted pattern on top of spot color) [1]: Finish (Gloss finish with a gloss ink)
  • Page 8 Printing Specify a spot color. Create two new swatches, and configure the settings as follows. Swatch Name Color Type Swatch [1] Spot1 Spot color Swatch [2] Spot2 Spot color IMPORTANT A spot color must be specified for every object printed with white or gloss ink. This ensures the RIP software and the printer can recognize the print area for the spot color correctly.

  • Page 9: Creating A Rip File

    Printing Creating a RIP File This section describes how to create a RIP file using SAi FlexiPRINT Production Manager Roland Edition. For information on how to create files using other RIP software, contact the applicable software distributor. MEMO • Selecting an output profile that is suitable for the color set used for spot color printing from the general- purpose profiles available ensures output with optimal color management.
  • Page 10 Printing Click the [Color Management] tab. Select the best profile for [Output profile]. MEMO Output profile names are structured according to the following rules. Refer to these rules to select the best profile. [1] : Printer name [2] : Resolution (720 × 1200 dpi, 720 × 900 dpi, Standard: 720 × 600 dpi) [3] : Media type (Non Transparent : Other than transparent media, Transparent : Transparent media) Configure the overprint settings.
  • Page 11 Printing Configure the spot color settings. Set "White ink options" and "Varnish ink options" to [Spot color] on the [Printer Options] tab. White Gloss MEMO When printing only gloss ink as a spot color, also set "White ink options" and "Varnish ink options" to [Spot color].
  • Page 12 FA02668 R2-210804...

Table of Contents