Viewing Information About The Media And The System; Displaying The Amount Of Media Remaining; Verifying The Setting For The Amount Remaining Every Time The Media Is Changed - Roland VersaCamm VP-540i User Manual

4-11 Viewing Information about the Media and the System

Displaying the Amount of Media Remaining

Procedure

MENU
SHEET REMAIN

SHEET REMAIN
SET LENGTH

SET LENGTH
0.0 m

W1200 mm
This display is updated.
SETUP SHEET
If setup has not been performed,
the set value flashes.
Description
You can display how much of the media in use is left. Once you set the amount of media remaining, the amount remaining is
displayed at the top menu until it reaches zero. If you cancel the setup such as by removing the media or raising the loading
4
lever, the amount remaining at that time flashes on the screen. The amount of media remaining is not updated automatically
when you change the media. Redo the setting whenever you change the media.
You can also make the setting display this menu automatically whenever you change the media. See the next section, "Verify-
ing the Setting for the Amount Remaining Every Time the Media Is Changed."
Note: The remaining amount that is displayed is only an estimate, and its accuracy is not assured.

Verifying the Setting for the Amount Remaining Every Time the Media Is Changed

Procedure

MENU
SHEET REMAIN

SHHET REMAIN
AUTO DISPLAY

AUTO DISPLAY
DISABLE

W1200mm
SETUP SHEET
102
Press
Press
Press
Press
Press
Use
25.0 m
Press
Press
L 25.0 m
L 25.0 m
Press
Press
Press
Press
Press
Use
ENABLE
Press
Press
.
twice.
.
.
.
to set the amount of media remaining.
to enable the setting.
to go back to the original screen.
.
twice.
.
twice.
.
to select "ENABLE."
to enable the setting.
to go back to the original screen.