3-4 Replacing Consumable Parts
Replacing the Separating Knife
If the separating knife becomes dull, replace it with the included replacement knife.
CAUTION
CAUTION
1.
Enter the blade replacement mode.
MENU
SUB MENU
SUB MENU
3
MAINTENANCE
MAINTENANCE
REPLACE KNIFE
FINISHED?
2.
Replace the separating knife.
64
Be sure to perform operations as specified by these instructions, and never touch
any area not specified in the instructions.
Sudden movement of the machine may cause injury.
Never touch the tip of the separating knife with your fingers.
Doing so may result in injury.
Press
Press
Press
Press
Press
Press
Press
The cutting carriage moves to a location where blade replacement is possible, and
then the screen shown in the figure appears.
Open the front cover.
Preparations are complete when this screen appears.
.
several times.
.
.
.
several times.
.
Remove the separating knife.
Loosen the screw until it slips out.
Grasp the screw portion, and slowly pull it out
in the direction of the arrow. When doing this, do
not pull it back toward you.