Table of Contents
Advertisement
4.
Reattach the side cover and the maintenance cover and quit the manual-cleaning mode.
CLEANING...
>>
CLOSE MAINTE-
NANCE COVER
Open the front cover and attach the maintenance cover.
Screw
Close the front cover.
Press
.
SETUP SHEET
5.
Perform a printing test to verify the results of the procedure.
Perform a printing test to check the results.
Perform cleaning using the machine's cleaning feature several times when necessary.
P. 42, "Printing Tests and Cleaning"
Screws
Side cover
Hook
Close the front cover.
Press
.
The print-head carriage moves to the right side of the machine, and then the screen
shown in the figure appears.
Press
to go back to the original screen.
3-3 Cleaning the Heads Using the Cleaning Kit
Attach the side cover.
Screw
Maintenance
cover
Screw
3
57
Advertisement
Table of Contents
