Table of Contents
Advertisement
4-8 Making Various Adjustments for Cutting
7.
Check the results of adjustment.
PRINT - CUT ADJ.
TEST PRINT
Description
You perform this when printing followed immediately by cutting yields positioning for printing and cutting that is slightly
misaligned. You print alignment marks, perform detection of the printed marks, and correct the discrepancy.
Subtle misalignment between the printing and cutting positions may occur due to the thickness of the media or the head
height. We recommend making correction to match the media you're using.
Default Setting
4
[F] (feed direction): 0.00 mm
[S] (scanning direction): 0.00 mm
94
Press
Press
Cutting position
Printing position
Cutting position and printing posi-
tion are aligned.
.
to execute.
If the printing and cutting lines are aligned, adjustment
is complete.
If further adjustment is needed, go back to step
fine-tune the adjustment.
and
Advertisement
Table of Contents
