Printing Tests And Cleaning - Roland VersaCamm VP-540i User Manual

2-4 Starting output

Printing Tests and Cleaning

Before you carry out actual printing, we recommend performing a printing test to ensure no dot drop-out occurs. If dot
drop-out occurs, perform cleaning.
How to Perform a Printing Test

FUNCTION
CLEANING
2

CLEANING
TEST PRINT

How to Perform Cleaning

FUNCTION
CLEANING

CLEANING
NORMAL

CLEANING...
>>
CLEANING
NORMAL

W1200mm
SETUP SHEET

Perform a printing test again to make sure the dot drop-out has been corrected.
If the problem persists, try performing cleaning a second time.
If the problem doesn't go away even after performing cleaning two or three times, then try cleaning using a differ-
ent method.
 P. 53, "When Head Cleaning Is Not Effective"
42
Press .
Press .
Press .
Dot drop-out
Press .
Press .
Press .
Press .
Press .
Cleaning starts.
When it finishes, the screen shown in the figure appears again.
Press to go back to the original screen.
Press .
A test pattern is printed.
You can freely set the location for printing the
test pattern.
 P. 69, "Setting the Output-start Location"