Replacing The Blade - Roland VersaCamm VP-540i User Manual

Replacing the Blade

If the blade becomes dull, replace it with the included replacement blade.
CAUTION Be sure to perform operations as specified by these instructions, and never touch
any area not specified in the instructions.
Sudden movement of the machine may cause injury.
CAUTION
Never touch the tip of the blade with your fingers.
Doing so may result in injury.
1.
Enter the blade replacement mode.

MENU
SUB MENU

SUB MENU
MAINTENANCE

MAINTENANCE
REPLACE KNIFE


FINISHED?
2.
Replace the blade.

Press .
Press several times.
Press .
Press .
Press .
Press several times.
Press .
The cutting carriage moves to a location where blade replacement is possible, and
then the screen shown in the figure appears.
Open the front cover.
Preparations are complete when this screen appears.
3-4 Replacing Consumable Parts
Remove the blade holder.
3
61