Table of Contents
Advertisement
4-4 Optimizing Printing or Cutting to Match Media Thickness
Performing Feed Correction to Alleviate Horizontal Bands and the Like
Procedure
1.
Print a test pattern.
MENU
CALIBRATION
CALIBRATION
TEST PRINT
2.
Check the test pattern you printed.
Gap present
4
3.
Enter the correction value.
SETTING
0.00%
4.
Go back to the original screen.
W1200mm
Description
The movement distance of media experiences subtle changes due to the thickness of the media and the temperature of the
media heating system. When the movement distance becomes discrepant, horizontal stripes are more likely to occur during
printing. We recommend performing correction to match the media you're using and the media heating system. Repeat the
process of printing a test pattern and entering a correction value several times to find the optimal value.
You can also make this setting on the computer (by, for example,choosing the media type in the software RIP you are using).
When you have made the setting on the computer, the computer's setting is used and the printer's setting is ignored.
76
Press
Press
Press
Press
Current correction
value
Press
Press
-0.40%
Use
Press
Press
.
several times.
.
to start printing.
Choose the one that
has the smallest gap
and the least amount of
overlap.
.
.
to make the setting for the correction value.
to enable the setting.
to go back to the original screen.
Overlap
Advertisement
Table of Contents
